Operating Manual EMI TEST RECEIVER ESIB7 - Rohde & Schwarz

ESIB
Connecting an External Keyboard
Connecting a Mouse
Caution:
The keyboard may only be connected when the instrument is switched off
(STANDBY). Otherwise, correct operation of the keyboard cannot be guaranteed.
A mouse can be connected to the PS/2 (MOUSE) connector on the rear panel of the instrument to make
it easier to use.
MOUSE
During measurements, softkeys, tables and data input fields may also be controlled by mouse. For
computer function, the mouse has the usual functions.
The control functions for the mouse during measurement operation are described in Chapter 3 in the
section "Mouse Control of Further Display Elements". This section contains a list in which the screen
display elements for mouse control of the corresponding softkeys and push buttons of the instrument
are described. Chapter 8 describes the connector interface.
After connection of the mouse and subsequent power-on, the mouse will be automatically recognized.
Special settings such as mouse cursor speed etc., can be made in the Windows NT menu START -
SETTINGS - CONTROL PANEL - MOUSE.
1088.7531.12 1.23 E-3