Operating Manual EMI TEST RECEIVER ESIB7 - Rohde & Schwarz

ESIB- Receiver
ESIB
AF Demodulators
ESIB provides demodulators for AM and FM signals. With these demodulators selected, a displayed
signal can be monitored using the internal loudspeaker or external headphones.
CONFIGURATION MODE - EMI RECEIVER menu:
DEMOD
DEMOD
DEMOD
ON OFF
AM
FM
The DEMOD softkey calls a submenu in which the desired
type of demodulation can be switched on.
The volume for loudspeaker and headphones is set by
means of control knob on the front panel. When the knob is
in the Remote position (left stop) the volume can be remotecontrolled.
DEMOD
ON OFF
The DEMOD ON/OFF softkey switches demodulation on/off.
When demodulation is on, the signal is demodulated.
IEC/IEEE-bus command [SENSe:]DEMod OFF
(DEModulation ON automatically switched
on with AM|FM)
AM
FM
The AM and FM selection switches can be activated one at a
time. They are used to set the desired demodulation type, FM
or AM. The default setting is AM.
IEC/IEEE-bus command :[SENSe:]DEMod AM | FM
Switchover between Full Screen and Split Screen Mode
CONFIGURATION MODE - EMI RECEIVER menu:
SPLIT SCRN
ON OFF
The SPLIT SCRN ON/OFF softkey toggles between full-screen and split-screen
mode.
During the scan ESIB automatically selects full-screen mode.
IEC/IEEE-bus command --
1088.7531.12 4.86 E-15