Regional Basic Professional Training Course in Korea

Regional Basic Professional Training Course (BPTC) on Nuclear Safety
secondary control facility is available for the safe shutdown of the plant if the main
control facility were to become uninhabitable.
Plant good housekeeping is evident. The following items show clearly the plant
cleanliness: painting, condition of components, sumps and thermal insulation, the
presence and control of leakage, obstructions, floor surfaces, labeling of components and
the posting of signs and directions in rooms, route posting, lighting, and posting and
status of doors. Important issues are also radiation protection, safety, emergency, first aid,
and fire protection facilities.
15.2.4. Operating rules and procedures
Operating personnel operate the plant with safe working practices so as to generate the
required electrical output while keeping the plant's operation within the Limiting
Conditions for Operation, and in accordance with the policy of the operating organization
and the requirements of the regulatory body.
Comprehensive operating procedures are provided for the operators. The guidance
provided in the procedures is clear, concise, verified for its accuracy and validity, and
adequate to enable trained operators to perform their activities. The procedures are
supported by reference material such as system descriptions, flow sheets, wiring
diagrams, and logic diagrams. The procedures and reference material are clearly
identified and readily accessible in the control room.
Typical documents to be used during the operation are the following:
Limiting Conditions for Operation;
❙ 852 ❙