Regional Basic Professional Training Course in Korea

Regional Basic Professional Training Course (BPTC) on Nuclear Safety
indicating: fire loading, entrance methods, equipment power supplies, personnel
evacuation routes and smoke and water evacuation plans.
Where site fire fighting capability is supplemented by assistance from local civil fire
fighting organizations, the outside organization is properly trained and equipped to
provide meaningful support.
15.2.9. Commissioning
Specific approval by the regulatory body is required before the start of normal operation.
Such approval will be on the basis of an appropriate safety analysis report and a
commissioning program. The commissioning program provides evidence that the
installation as constructed meets the design intent and complies with the safety
requirements. Operating procedures are validated, to the extent practicable, as part of the
commissioning program, with the participation of the future operating personnel.
The commissioning program meets the objectives of the operating organization and is
approved by the regulatory body. It is divided into review stages, and progression from
one stage to the next does not continue until an evaluation of the results available from
the commissioning tests and an audit have been carried out to ascertain that all objectives
and regulatory requirements have been met.
Authorities and responsibilities for the commissioning process are clearly defined and
delegated to the individuals performing the work. The interfaces between those groups
involved in commissioning (e.g. design, construction, contractors, commissioning and
operations groups) are clearly defined and properly controlled. A sufficient number of
qualified operations personnel, at all levels and in all areas, are directly involved in the
❙ 868 ❙