DCP Series Telcon Message Manual - Public Support Login - Unisys

Event 12 TCP–IP GATEWAY EVENT
1003 HOSTSRV ILLOGICAL MESSAGE
Description: The message type received was invalid for the current connection. The
following information should be recorded and given to the site analyst:
R12: DCA connection state (8 bits)/DDN connection state (8 bits). Connection
state codes found in DDNSVS
R11: PK$MTYPE — message type from current message packet. Message types
found in AADDNDEF
The host services module for the TCP–IP Stack program product generates this
CENLOG.
1004 HOSTSRV INVALID DCA STATE FOUND
Description: The message type received was invalid for the current DCA connection.
The host services module for the TCP–IP Stack program product generates this
CENLOG.
1005 HOSTSRV INVALID LLP STATE FOUND
Description: The message type received was invalid for the current DDN
connection. The host services module for the TCP–IP Stack program product
generates this CENLOG.
1006 HOSTSRV INPUT HIC ANALYSIS ERROR
Description: An error was detected when translating the internal interface packet
parameters into the HIC sequences for the (DDNG) DDNSVS header. The host
services module for the TCP–IP Stack program product generates this CENLOG.
1007 HOSTSRV NO MCT SPACE AVAILABLE
Description: Contact your site administrator. The host services module for the
TCP–IP Stack program product generates this CENLOG.
1008 HOSTSRV REPEATED ABORT INDICATION RECEIVED
Description: Contact your site administrator. The host services module for the
TCP–IP Stack program product generates this CENLOG.
1009 HOSTSRV INVALID LOCAL PORT
Description: The message received from the LLP had a MEMBER FOUND invalid
local passive open port number. (The valid local passive open port numbers are: 20,
21, 23, 25, 256, 257, 258, or 275–299.) The host services module for the TCP–IP Stack
program product generates this CENLOG.
3–62 7436 0728–303