DCP Series Telcon Message Manual - Public Support Login - Unisys

Event 13 PROCEDURE PROCESSING ERROR (INTERNAL)
SNA: 2803 – ICS Registration Failed
Description: Internal software error in the SNA/net SNMP (Simple Network
Management Protocol) Submanaged Program. Indicates the user registration with ICS
failed.
SNA: 2808 – Invalid Input Channel
Description: Internal software error in the SNA/net SNMP (Simple Network
Management Protocol) Submanaged Program. An invalid receive channel was
detected during input queue processing.
SNA: 2809 – Invalid Receive Status
Description: Internal software error in the SNA/net SNMP (Simple Network
Management Protocol) Submanaged Program. An unknown receive status was
detected during input queue processing.
X.25 SNMP: Software logic error ("procedure name")
Description: The X.25 PSCS SNMP interface module (PDNSMP) encountered an
unexpected processing error. This event may be preceded by another CENLOG entry
indicating the type of error that occurred. This error may cause PDNSMP to become
dormant. In this case, no SNMP MIB information related to X.25 can be retrieved.
R8: PDNSMP status
Attributes affected: Error event, supplementary text message, and the first 128
bytes of a message buffer, if present.
Action: This event indicates an internal software interface error. You should submit
the contents of this entry to your Unisys representative for analysis. You may have to
re-start your Telcon run in order to recover from this error. If the error re-occurs, take
a Telcon dump and submit a UCF. Procedure: The procedure name, which is internal
to the X.25 PSCS PDNSMP module, is displayed as part of the supplementary text
message.
5–70 7436 0728–303