DCP Series Telcon Message Manual - Public Support Login - Unisys

NMS and DSA Messages
WARNING: PDTE dte-id ALREADY UP
Description: Displayed as part of an UP PDTE command when the DTE specified is
already marked up in configuration. This is an X.25 PSCS NMS message.
WARNING: X.25 TRUNK trunk-id ALREADY DOWN
Description: Displayed as part of a response to a DOWN PTRK command when the
trunk specified is already marked down in configuration. This is an X.25 PSCS NMS
message.
WARNING: X.25 TRUNK trunk-id ALREADY UP
Description: Displayed as part of an UP PTRK command when the X.25 part of a
trunk is already marked up in configuration. This is an X.25 PSCS NMS message.
X.25 TRUNK trunk-id NOT FOUND
Description: Command specified an X.25 trunk ID that is not in configuration. This
is an X.25 PSCS NMS message.
XFER–COMMAND RECEIVED
Description: The end user program processing the transfer command has received
an XFER command input, and is beginning to parse the command text.
XFER ERROR–INVALID HOST FILE CYCLE
Description: The host file cycle is invalid.
Action: Correct and reenter the host file cycle.
XFER ERROR–INVALID NMS COMMAND PARAMETER
Description: An XFER STATUS or CNCL command was submitted with an invalid
parameter.
Action: Enter the correct parameter.
XFER ERROR–NO DEFAULT HOSTID CONFIGURED
Description: No default XFER destination is configured to allow an XFER FROM
filename type of transfer.
Action: For the TO= parameter, use an XEU that points to the desired destination
host.
17–34 7436 0728–303