DCP Series Telcon Message Manual - Public Support Login - Unisys

FRLY: DLCI n # ACTIVE
Event 11 ILM EVENT
Description: This message indicates that the DLCI represented by DLCI name (n)
and number (#) has been added as active to the Frame Relay network connection as
given by the line name.
FRLY: DLCI n # INACTIVE
Description: This message indicates that the DLCI represented by DLCI name (n)
and number (#) has been changed to be inactive by the Frame Relay network
connection as given by the line name.
FRLY: DLCI n # VIOLATION
Description: This message indicates that the DLCI represented by DLCI name (n)
and number (#) has had a violation by the Frame Relay network connection as given
by the line name. A non-configured Frame Relay network DLCI may have been used
on a frame.
ILMLOOP (012)
Description: The ILMLOOP Interface Application has received notification of link
availability from DLCMAN.
Action: None, this message is informational only.
ILMX25 LCB Not Found During SAI Down Processing
Description: After PDNILM receceived an SAI down facility control request from the
ILM Platform (refer to the “ILMX25: Received SAI Down From ILM Platform”
CENLOG). PDNILM was unable to obtain the line control block (LCB). A software
error occurred between the PDNILM and the ILM PLatform interface.
Attributes affected: Line event includes the port number and supplementary text
message. Procedure PDN8ILM of the X.25 PSCS program product generates this
CENLOG.
Action: Use the NMS DOWN and UP LINE commands to re-initialize the line.
7436 0728–303 6–67