DCP Series Telcon Message Manual - Public Support Login - Unisys

Event 2 LINE DISCONNECTION (ABNORMAL)
Timeout, Idle Channel (T3)
Description: The Common Network Management Service (CNMS) X.25 interface
module in PDNSVS received an unrecoverable line-error notification. The port
processor’s T3 timer expired. This timer value is configured on the X25DEF
statement’s T3 parameter. This event could include the LINE name.
R8: CNMS unrecoverable line-error reason code
R10: PDNGRP STE index
Attributes affected: Supplementary text message, Line event, Line Control Block
(LCB) address may be in Register R11. The X.25 PSCS program product generates this
CENLOG.
Procedure: PDNSVS
Timeout, Message Timer (Output)
Description: The Common Network Management Service (CNMS) X.25 interface
module in PDNSVS received an unrecoverable line-error notification. The port
processor’s message response timer expired. This event could include the LINE
name.
R8: CNMS unrecoverable line-error reason code
R10: PDNGRP STE index
Attributes affected: Supplementary text message, Line event, Line Control Block
(LCB) address may be in Register R11. The X.25 PSCS program product generates this
CENLOG.
Procedure: PDNSVS
UDLCRS
Description: R8: 0019. AE$UD144. (UDLC): OUTPUT RESPONSE TIMEOUT. The
start data transfer chain completion status includes output response timer expiration.
The PP chains are halted, and the line is disconnected.
Telcon generates this CENLOG.
UDLCRS
Description: R8: 001A. AE$UD146. (UDLC): MESSAGE TIMER TIMEOUT. The start
data transfer chain completion status includes output message timer expiration. The
line is disconnected.
Telcon generates this CENLOG.
14–8 7436 0728–303