30.01.2013 Views

DCP Series Telcon Message Manual - Public Support Login - Unisys

DCP Series Telcon Message Manual - Public Support Login - Unisys

DCP Series Telcon Message Manual - Public Support Login - Unisys

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Event 6 SESSION TERMINATION COMPLETED<br />

TRNG (022): Station detects signal loss - Lobe cable fault or H/W err<br />

Description: Line not operational. Hardware error.<br />

Action: Correct lobe fault.<br />

TRNG (023): Ring/Hardware event (event code in supplemental msg)<br />

Description: Ring not operational. Hardware error.<br />

Action: Correct hardware fault.<br />

TRNG (024): Ring Input frame discarded - unexpected MTF<br />

Description: Buffer discarded. Internal error.<br />

Action: None.<br />

TRNG (025): No active Stn for Ring Input - frame discarded<br />

Description: Line is not operational. Internal error.<br />

Action: Down and then up the line.<br />

TRNG (026): Ring Input frame too large - frame discarded<br />

Description: <strong>Message</strong> discarded. <strong>Message</strong> error.<br />

Action: None.<br />

TRNG (027): “ ) ;<br />

Description: Buffer discarded. Internal error.<br />

Action: None.<br />

TRNG (029): Can’t queue output to device driver<br />

Description: <strong>Message</strong> discarded. Internal error.<br />

Action: Submit a UCF with a dump of the ILM.<br />

TRNG (030): Tried to send output that was LLC1 but Non-addressing<br />

Description: Buffer discarded. Internal error.<br />

Action: Submit a UCF to HLE.<br />

7436 0728–303 6–9

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!