DCP Series Telcon Message Manual - Public Support Login - Unisys

Resilient Line is Standby
Event 2 LINE DISCONNECTION (ABNORMAL)
Description: The Common Network Management Service (CNMS) X.25 interface
module in PDNSVS received an unrecoverable line-error notification. The port
processor detected the line as dormant. A resilient line is configured to be active or
standby. If an active line fails, or is configured as standby, then it becomes dormant
and its standby becomes active. This event could include the LINE name.
R8: CNMS unrecoverable line-error reason code
R10 : PDNGRP STE index
Attributes affected: Supplementary text message, Line event, Line Control Block
(LCB) address may be in Register R11. The X.25 PSCS program product generates this
CENLOG.
Procedure: PDNSVS
Sent FRMR in ITS
Description: The Common Network Management Service (CNMS) X.25 interface
module in PDNSVS received an unrecoverable line-error notification. The port
processor sent a frame-reject frame while in the information transfer state. Note that
in some parameter definitions of a network type (see the X25DEF statement’s
NETWORK parameter), the FRMR frame does not cause an unrecoverable line-error
notification. Network parameter definitions are configured by the X25DEF
statement’s L2OPT parameter, or those values defined for a particular network
identifier. This event could include the LINE name.
R8: CNMS unrecoverable line-error reason code
R10: PDNGRP STE index
Attributes affected: Supplementary text message, Line event, Line Control Block
(LCB) address may be in Register R11. The X.25 PSCS program product generates this
CENLOG.
Procedure: PDNSVS
7436 0728–303 14–7