DCP Series Telcon Message Manual - Public Support Login - Unisys

Event 3 EVENT/ERROR DETECTED AT L3 (NETWORK)
X.25 SNMP: MAU SNMP Component is active (“procedure name”)
Description: The X.25 PSCS SNMP interface module (PDNSMP) successfully
completed its initialization with ICS and the SNMP Management-Agent user (MAU)
interface. This event indicates that you can access X.25-related information from the
SNMP MIB using an SNMP manager workstation. If you cannot, refer to the ENS
Installation, Configuration and Operations Guide (7441 2065) for verifying the
SNMP Agent program. Also refer to the CD 6R2 Release Notes (7442 1207) X.25 PSCS
Troubleshooting section for configuration and operational considerations.
Attributes affected: Supplementary text message.
Procedure: The procedure name, which is internal to the X.25 PSCS PDNSMP
module, is displayed as part of the supplementary text message.
X.25: SUB-ADDRESS NOT PERMITTED FOR LEVEL 4 TYPE
Description: X.25 PSCS received an incoming call packet from the network. The
X25ROUTE statement’s SUBADR parameter is used to configure a layer 4 based upon
the called DTE address sub-address digits, but X.25 PSCS does not support the subaddress
routing this layer 4.
R9: Level 4 routing ID (ZH$ Equate)
Attributes affected: Supplementary text message. The X.25 PSCS program product
generates this CENLOG.
Action: Modify the X25ROUTE statement. Procedure: PCALL.
X.25: TRACE CATALOG FILE SIZE RECEIVED
Description: The PDNL3 module acknowledges the receipt of the trace file size data
value specified in the DATA parameter of the NMS TRAC X25 command. The TYPE
parameter included an “L.”
R8: DATA parameter value received
Attributes affected: Supplementary text message. The X.25 PSCS program product
generates this CENLOG. Procedure: PDNL3.
7436 0728–303 13–69