DCP Series Telcon Message Manual - Public Support Login - Unisys

SYSSESN
TRS
Event 14 CONFIGURATION FILE ACCESS / REQUEST ERROR
Description: A CFACCS call failed.
R14: 03 = identifier
R15: Error code from CFACCS call
Telcon generates this CENLOG.
Description: TRS made a call to configuration access, and an error status was
returned, indicating a no-find or disk-access error.
R11: LCB
R14: IOPID
TSM
Telcon generates this CENLOG.
Description: Control returns to TSM from a CFACCS call with a hardware or
software error. Check the error field upon return. This may lead to conflicts within
the configuration. Telcon generates this CENLOG.
UTS4000 is not configured
Description: UTS 4000 is not properly configured.
R8: Logical link number
R14: MCT address
Attributes affected: Supplementary text message. The X.25 PSCS program product
generates this CENLOG. Procedure: PDNL44.
Action: Correct the DTE and/or CLSTR statements for the UTS 4000 cluster.
X.25 SNMP: CFACCS returns error response ("procedure name")
Description: The X.25 PSCS SNMP interface module (PDNSMP) received an error
response from the Telcon configuration access (CFACCS) interface. This adversely
affects the ability of X.25-related MIB information from being retrieved by the SNMP
management workstation. It may be a temporary condition.
R8: CFACCS error type
Attributes affected: Configuration event, recoverable error event, supplementary
text message, and a table of the first 128 bytes of the CFACCS response message
7436 0728–303 5–73