DCP Series Telcon Message Manual - Public Support Login - Unisys

FDDI (059): MAC neighbor change: New XXX reported
Event 11 ILM EVENT
Description: FDDI Station Management (SMT) has detected a ring topology change.
CENLOGs FDDI (060) and FDDI (061) provide additional change information. XXX
will be replaced by a new Upstream Neighbor Address (UNA) or a new Downstream
Neighbor Address (DNA). This CENLOG is informational. FDDI Interface Application
(FDDIIA) generates this CENLOG.
Action: None, this message is informational only.
FDDI (060): Old UNA:xx-xx-xx-xx-xx-xx New UNA:xx-xx-xx-xx-xx-xx
Description: Refer to CENLOG FDDI (058). This CENLOG provides additional
information for ring topology changes for old and new Upstream Neighbor Addresses
(UNA). FDDI Interface Application (FDDIIA) generates this CENLOG.
Action: None, this message is informational only.
FDDI (061): Old DNA:xx-xx-xx-xx-xx-xx New DNA:xx-xx-xx-xx-xx-xx
Description: Refer to CENLOG FDDI (058). This CENLOG provides additional
information for ring topology changes for old and new Downstream Neighbor
Addresses (DNA). FDDI Interface Application (FDDIIA) generates this CENLOG.
Action: None, this message is informational only.
FDDI (062): LSAP value already in use
Description: A SAP configuration statement is being processed that conflicts with a
previous SAP statement. FDDI Interface Application (FDDIIA) generates this
CENLOG.
Action: Check your configuration for conflicting LSAP configuration parameters.
FDDI (063): LLC2 Disconnect Ind received from remote SAP
Description: An LLC2 Disconnect Mode (DM) frame has been received by the FDDI
Interface Application (FDDIIA). The FDDIIA closes the SAP.
Action: None, this message is informational only.
FDDI (064): Duplicate address detected on MAC–XXXX
Description: FDDI Station Management (SMT) has detected a duplicate station
address on the ring. XXXX is replaced with MY DUPLICATE or MY UNA
DUPLICATE.
Action: Update your configuration.
7436 0728–303 6–65