DCP Series Telcon Message Manual - Public Support Login - Unisys

*** ERROR: NO GROUP ASSOCIATED WITH THE LINE ***
NMS and DSA Messages
Description: An attempt was made to bring up a poll group for a switched line.
*** ERROR: NO HARDWARE LM AVAILABLE ***
Description: The TO port hardware line module is not compatible with the line
facility.
Action: Verify the TO port number, and reenter the MOVE command.
*** ERROR: NO RECOVERY FILE. REENTER MOVE COMMAND ***
Description: This is the response to the RCVR command when a system failure has
occurred during a facility move, but a recovery file is not cataloged.
Action: Reenter the MOVE command.
*** ERROR: NO SESSION PATH AVAILABLE ***
Description: No session path exists to the destination.
Action: Configuration error. Notify systems analyst.
*** ERROR: NO SPACE OR NO FREE DATA SET LABEL ***
Description: No space or free data-set label is available on the volume or device
type.
Action: Change the volume, device type, or size, and reenter the command.
*** ERROR: ON MULTIPLE DCP CONFIGURATION ***
Description: A resilient command has taken place (solicited or automatic).
*** ERROR: OUTPUT FILE SIZE TOO SMALL ***
Description: The output file for a copy is too small.
Action: Recatalog a larger output file, and retry.
*** ERROR: PARAMETER VALUE MUST BE A NUMBER ***
Description: An input parameter value is not a number.
Action: Change the invalid parameter value, and reenter the command. Refer to the
syntax definition of a number.
7436 0728–303 17–15