DCP Series Telcon Message Manual - Public Support Login - Unisys

Event 11 ILM EVENT
FDDI (065): SMT Frame error detected on MAC–XXXX
Description: XXXX is replaced by ACTIVE or NOT ACTIVE as required by the error
type. This CENLOG is originated by the FDDI Interface Application (FDDIIA).
Action: None, this message is informational only.
FDDI (066): Closing Connection - Max Retry exceeded
Description: The FDDI Interface Application (FDDIIA) has reached the maximum
number of retries in its attempt to recover an LLC2 connection. The connection is
closed and reopened. This CENLOG is originated by the FDDI Interface Application
(FDDIIA).
Action: None, this message is informational only.
FRLY: PORT UP
Description: This message indicates that the Frame Relay software has registered
with the ILM platform.
FRLY: PORT DOWN
Description: This message indicates that the Frame Relay network connection is not
operational.
FRLY: PORT EXCEPTION
Description: This message indicates that an exception indication has been received
from the UDLC driver or that an LMI exception has occurred.
FRLY: PORT RECOVERY
Description: This message indicates that the Frame Relay network connection has
recovered from an exception event.
FRLY: DLCI n # NEW
Description: This message indicates that the DLCI represented by DLCI name (n)
and number (#) has been added as active to the Frame Relay network connection as
given by the line name.
FRLY: DLCI n # REMOVE
Description: This message indicates that the DLCI represented by DLCI name (n)
and number (#) has been removed by the Frame Relay network connection as given
by the line name. The destination of the DLCI is not operational.
6–66 7436 0728–303