DCP Series Telcon Message Manual - Public Support Login - Unisys

Event 3 EVENT/ERROR DETECTED AT L3 (NETWORK)
X.25: TRACE CONTENT DATA RECEIVED
Description: The PDNL3 module acknowledges the receipt of the trace items data
value specified in the DATA parameter of the NMS TRAC X25 command. The TYPE
parameter included an “M.”
R8: DATA parameter value received
Attributes affected: Supplementary text message. The X.25 PSCS program product
generates this CENLOG. Procedure: PDNL3.
X.25: TRACE FILE CLOSING ERROR
Description: The PDNL3 module was unable to successfully close the PDNL3 trace
file. The DCP OS FILE$ service returned an error.
R8: DCP OS FILE$ error code
Attributes affected: Supplementary text message. The X.25 PSCS program product
generates this CENLOG. Procedure: PDNL3.
X.25: TRACE FILES CLOSED
Description: The PDNL3 module acknowledges the receipt of a close trace file
request by specifying a zero in the DATA parameter of the NMS TRAC X25 command.
The TYPE parameter included an “L.”
Attributes affected: Supplementary text message. The X.25 PSCS program product
generates this CENLOG. Procedure: PDNL3.
X.25: TRACE INTERFACE DATA RECEIVED
Description: The PDNL3 module acknowledges the receipt of the trace interface data
value specified in the DATA parameter of the NMS TRAC X25 command. The TYPE
parameter included an “H.”
R8: DATA parameter value received
Attributes affected: Supplementary text message. The X.25 PSCS program product
generates this CENLOG. Procedure: PDNL3.
THERE ARE DTES WITHOUT DTEID!!
Description: The PDNDXA module was unable to obtain an internal DTE statement
identifier from the DTE STE. A software error has corrupted the DTE STE or the
initialization routine (PDNIUS) in X.25 PSCS.
Attributes affected: Configuration event. The X.25 PSCS program product
generates this CENLOG. Procedure: TPCDATA.
13–70 7436 0728–303