DCP Series Telcon Message Manual - Public Support Login - Unisys

Event 11 ILM EVENT
FDDI (051): Send CNF error
Description: FDDI IA transmit confirmation error on a send message. The message
was not delivered. The FDDI link provider interface application (LPIA) for the ILM
software generates this CENLOG.
FDDI (052): No message header for input data
Description: FDDI IA was unable to allocate message space for input. The FDDI
link provider interface application (LPIA) for the ILM software generates this
CENLOG.
FDDI (053): put_q to line's input queue failed
Description: FDDI IA was unable to send input to an HLE. The FDDI link provider
interface application (LPIA) for the ILM software generates this CENLOG.
FDDI (055): Oversized User Data Unit
Description: An HLE sent an oversized data unit to FDDI IA. The message was not
delivered. The FDDI link provider interface application (LPIA) for the ILM software
generates this CENLOG.
FDDI (056): No identifiable MODE on output
Description: Output message processing cannot be continued. The FDDI link
provider interface application (LPIA) for the ILM software generates this CENLOG.
FDDI (057): No Station CB to receive input
Description: Input message processing error. The message was discarded. The
FDDI link provider interface application (LPIA) for the ILM software generates this
CENLOG.
FDDI (058): Ring Configuration Change = Isolated C_WRAP_A
C_WRAP_B THRU
Description: FDDI Station Management (SMT) has detected a ring topology change.
CENLOGs FDDI (060) and FDDI (061) provide additional change information. This
CENLOG is informational. FDDI Interface Application (FDDIIA) generates this
CENLOG.
Action: None, this message is informational only.
6–64 7436 0728–303