DCP Series Telcon Message Manual - Public Support Login - Unisys

Event 2 TERMINAL SIGN-OFF
Event 2 TERMINAL SIGN-OFF
TERMINAL SIGN-OFF
Description: This event is for notification only and signifies that a valid logoff was
received by the operating system and processed successfully. The resources for this
terminal session have been released. The terminal should now be in a state to accept
another logon command. Telcon generates this CENLOG.
LMS
Action: None.
Description: A terminal signed off using LMS.
PDNURS
TRS
Description: The X.25 PSCS UTS 4000 Cluster and X.29 Terminal handler module
(PDNURS) is in the process of signing-off one of its terminals. The reasons include a
Telcon $$SOFF received from the terminal or some other event that has caused the
virtual circuit connection to be cleared. This event includes both the LINE and TERM
names.
Attributes affected: The Terminal Control Block (TCB) address is in register R12.
The Line Control Block (LCB) is in register R11. This CENLOG is generated by the
X.25 PSCS program product.
Procedure: PDNURS
Description: TRS received a sign-off message from the PPS/VTR to deallocate
terminal resources.
R11: LCB
R12: TCB
Telcon generates this CENLOG.
6–2 7436 0728–303