DCP Series Telcon Message Manual - Public Support Login - Unisys

Event 4 PORT PROCESSOR (PP) SPECIFICATION EXCEPTION
Event 4 PORT PROCESSOR (PP) SPECIFICATION
EXCEPTION
PORT PROCESSOR (PP) SPECIFICATION EXCEPTION (PP STATE ITEM
RECEIVED)
Description: An internally recoverable event posted by an I/O processor. It could
also result from bringing down a line or channel. Telcon generates this CENLOG.
Action: No action is necessary. If the problem persists, down the line using NMS and
contact the local customer engineer.
AGPPST
Description: Signifies that the LPH requested that a log be performed during PP
state-item processing in AGSYSRTN. After a PP state-item occurs, the line or lines on
that port are brought down. Use the NMS UP command to continue use of that line.
R9: Output chain address
R12: Error subtype
R13: Supplementary status 1
R14: PPID
R15: LPH return status
Telcon generates this CENLOG. The table space in the CENLOG contains the entire
text of the state item. For detailed information on the state item, refer to the DCP
CPA Program Reference Manual (7431 5805–100).
BSC LPH
Description: BSC port processor state-item event has occurred.
R8: PAO address
R9: State-item status
R10: LC$AFLG
R11: LCB address
R12: LC$B flag word
R13: LC$FLGW flag word
R14: Port processor ID
R15: LC$SSTAT flag word
Telcon generates this CENLOG.
7–6 7436 0728–303