DCP Series Telcon Message Manual - Public Support Login - Unisys

Event 15 CONFIGURATION ERROR DETECTED / UNDEFINED
DMOPEN
Description: After DMOPEN receives a valid ATTACH request from DTP, DMOPEN
must determine the group ID for the terminal. This is accomplished by obtaining the
information from the configuration file by providing CFACCS with the STE index.
This code is used when CFACCS reports errors while attempting to read the
configuration file. Telcon generates this CENLOG.
R9: Configuration access buffer address (msg)
R14: STE index
DUPLICATE NODE DETECTED IN NETWORK, NA = node address
Description: Duplicate node detected in network. This node has been kept from
entering the network because it is considered to be a duplicate node, or a neighbor to
this node was not allowed because it was considered to be a neighbor node. Telcon
generates this CENLOG in the DNS modules.
Action: The operator must determine which nodes have the same address specified
in the supplementary message (NA = ) and correct the configuration.
ILLEGAL UNKNOWN DTE ADDRESS
Description: A call indication packet was received from a network that contained an
unrecognizable DTE address. No user data was provided and no default layer 4 was
configured.
R9: Logical channel number
R12 – 15: Calling remote DTE address
Attributes affected: Supplementary text message, Display Event. The X.25 PSCS
program product generates this CENLOG. Procedure: PCALL.
ILLEGAL FACILITY CODE REQUESTED
Description: A call indication packet with a facility field contains an illegal or
unknown facility code. The call is cleared.
R8: Illegal facility code
R9: Clear packet’s diagnostic code
Attributes affected: Supplementary text message, Display event. The X.25 PSCS
program product generates this CENLOG. Procedure: PCALL.
5–76 7436 0728–303