DCP Series Telcon Message Manual - Public Support Login - Unisys

TSM
Event 9 INVALID RUN TIME TABLE ACCESS
Description: When TSM receives a secondary session command, the user application
specified in the command’s parameter table entry is not found in TSM’s list of defined
applications. The secondary session command is not processed. Check TSM’s list of
defined applications and the parameter table entry for the specified command. Telcon
generates this CENLOG.
TSTN
Description: Received a message from external TS through UDLC/HCC with an
invalid TS ID#. Message discarded. Telcon generates this CENLOG.
TTYLPH
Description: This event occurs if TTYLPH can not get visibility to either the LCB or
the TCB. If it does occur, the MCT/message (if any) that initiated processing is
discarded. Other information is logged in the registers, but applicable to debug only.
Telcon generates this CENLOG.
UDLCRS
Description: R8: 0003. AE$UD030. (UDLC). BAD CONTROL MESSAGE PRDM IOP
MP$FX INVALID. The contents of the MP$FX field in the MPA are invalid. The MPA
is built by a port processor in an MCT. Telcon generates this CENLOG.
UDLCRS
Description: R8: 0004. AE$UD030: (UDLC). BAD CONTROL MESSAGE PRDM IOP
MP$SE6 INVALID.
The contents of the MCT parameter area (MPA) are invalid. The MP$ equates are
defined in AAHARDEF. The MPA is built in an MCT by a port processor.
R9: Contents of the MP$CF and MP$DF fields of the MPA
R14: LINE-ID
Telcon generates this CENLOG.
UDLCRS
Description: R8: 0005. AE$UD620: (UDLC). CONFIG READ ERROR ON LINE
TABLE FOR NMS COMMAND. The NMS message being processed by UDLC services
contained the line facility HIC. An error occurred in attempting to read the line
information table (LIT). The function requested by the NMS message was not
performed.
Telcon generates this CENLOG.
7436 0728–303 5–31