DCP Series Telcon Message Manual - Public Support Login - Unisys

NMS and DSA Messages
*** ERROR: DTYP VALUE INVALID ***
Description: The parameter value can be only one of a few fixed-character strings
(names).
Action: Change the value, and reenter the command.
*** ERROR: DUPLICATE FACILITY NAME ***
Description: This is the response to the MOVE command when the facility being
moved already exists on the destination Telcon node.
Action: Verify the facility name, and reenter the MOVE command.
*** ERROR: DUPLICATE FILE NAME ***
Description: The specified file is already cataloged.
Action: Change the file name, and reenter the command.
*** ERROR: EXTERNAL COMMAND TEXT MISSING ***
Description: The XCMD must be followed by a non-blank character string.
Action: Verify the text, and reenter the command.
*** ERROR: FACILITY NOT FOUND ***
Description: The facility name is not defined according to the following:
• Configuration
• Directory services
• Directory services is not available
Action:
• Verify the facility name.
• If using directory services, verify that the DSA is running.
*** ERROR: FACILITY MUST BE A TERM-LINE OR CLTR OR TERM ***
Description: The LINE, CLTR, TERM, or STN facility specified on the MOVE
command is not a terminal line, cluster, terminal, or station.
Action: Verify the facility type and name, and reenter the MOVE command.
17–10 7436 0728–303