DCP Series Telcon Message Manual - Public Support Login - Unisys

Sense Data
080B Bracket Race Error. Loss of contention within the bracket protocol. This error
can arise when bracket initiation/termination by both NAUs is allowed.
080C Procedure Not Supported. A procedure (Test, Trace, IPL, REQMS type, MS
major vector key) specified in an RU is not supported by the receiver.
080D NAU Contention. A request to activate a session was received while the
receiving half-session was awaiting a response to a previously sent activation
request for the same session. For example, the SSCP receives an ACTCDRM
from the other SSCP before it receives the response for an ACTCDRM that is
sent to the other SSCP and the SSCP ID in the received ACTCDRM was less
than or equal to the SSCP ID in the ACTCDRM previously sent.
080E NAU Not Authorized. The requesting NAU does not have access to that
requested resource.
080F End User Not Authorized. The requesting end user does not have access to the
requested resource.
0810 Missing Requester ID. The required requester ID was missing.
0811 Break. Asks the receiver of this sense code to terminate the present chain with
CANCEL or with an FMD request carrying EC. The half-session sending the
Break sense code enters chain-purge state when Break is sent, the half-session
receiving the Break sense code discards the terminated chain without
retransmitting it.
0812 Insufficient Resource. Receiver cannot act on the request because of a
temporary lack of resources.
0813 Bracket Bid Reject — No RTR Forthcoming. BID (or BB) was received while
the first speaker was in the in-bracket state or while the first speaker was in the
between-brackets state and the first speaker denied permission. RTR is not
sent.
0814 Bracket Bid Reject — RTR Forthcoming. BID (or BB) was received while the
first speaker was in the in-bracket state or while the first speaker was in the
between-brackets state and the first speaker denied permission. RTR will be
sent.
0815 Function Active. A request to activate a network element or procedure was
received, but the element or procedure was already active.
0816 Function Inactive. A request to deactivate a network element or procedure
was received, but the element or procedure was not active.
0817 Link or Link Resource Inactive. A request requires the use of a link or link
resource that is not active.
0818 Link Procedure in Process. CONTACT, DISCONTACT, IPL, or other link
procedure in progress when a conflicting request was received.
7436 0728–303 D–9