DCP Series Telcon Message Manual - Public Support Login - Unisys

Event 3 EVENT/ERROR DETECTED AT L3 (NETWORK)
R8: DCP/OS FILE$ error code corresponding to equate FR$NS, “no space or no
free DSL”
Attributes affected: Supplementary text message. The X.25 PSCS program product
generates this CENLOG. Procedure PCALL.
Action: Delete some unused DCP mass storage files to free disk space. The disk
space required must be contiguous.
X.25: PDNCALL TRACE FILE CLOSING ERROR
Description: The PDNL3 module was unable to successfully close PDNCALL’s trace
file. The DCP OS FILE$ service returned an error.
R8: DCP OS FILE$ error code
Attributes affected: Supplementary text message. The X.25 PSCS program product
generates this CENLOG. Procedure: PDNL3.
X.25: PDNCALL TRACE FILE ERROR
Description: The NMS TRAC SNAP=X25 command was used to enable tracing during
establishment of a virtual circuit. An error occurred with the trace file used by the
PDNCALL module.
R8: Error code returned by the DCP/OS FILE$ service request. Consult the
DCP/OS Operations Reference Manual (7831 5702) for a description of the
error code.
Attributes affected: Supplementary text message. The X.25 PSCS program product
generates this CENLOG.
Action: Depends upon the error code. May indicate problems with the mass storage
device. Procedure: PCALL.
7436 0728–303 13–65