DCP Series Telcon Message Manual - Public Support Login - Unisys

Event 12 TCP–IP GATEWAY EVENT
IP: INPUT LOST -- CONFIGURATION ERROR
Description: An input message was discarded. It could not be processed because it
was received on an incorrectly configured interface. The TCP–IP Stack program
product generates this CENLOG.
IP: INPUT LOST, OUT OF RESOURCES
Description: An input message could not be processed for lack of resources. If it
occurs frequently, review your sizing requirements. Your configuration may be using
more resources than necessary if it contains many normally unused facilities. The
TCP–IP Stack program product generates this CENLOG.
IP: INPUT LOST, TRANSMISSION ERROR
Description: An input message was discarded because IP detected a transmission
error. The TCP–IP Stack program product generates this CENLOG.
IP: INTERFACE DOWN, NET = !
Description: IP received indication that there are no available connections to a
subnetwork. Registers 8 and 9 contain the network address. The TCP–IP Stack
program product generates this CENLOG.
IP: INTERFACE UP, NET = !
Description: IP received indication that there are connections available to a
subnetwork. Registers 8 and 9 contain the network address. The TCP–IP Stack
program product generates this CENLOG.
IP: INTERNAL ERROR, POSSIBLE RIP PROBLEM
Description: IP detected an internal error. This may indicate a serious software
fault. The TCP–IP Stack program product generates this CENLOG.
IP: INTERNAL ERROR, POSSIBLE SMP PROBLEM
Description: IP detected an internal error. This may indicate a serious software
fault. The TCP–IP Stack program product generates this CENLOG.
IP: INTERNAL INTERFACE ERROR
Description: IP has detected an internal error. Another TCP–IP component is
behaving in an unexpected manner. This may indicate a serious software fault. The
TCP–IP Stack program product generates this CENLOG.
3–40 7436 0728–303