DCP Series Telcon Message Manual - Public Support Login - Unisys

TRNG (061): Station removed from Ring - xxxx
where xxxx is:
Unknown H/W problem
H/W invalid XOP
H/W invalid E-int’rupt
H/W invalid interrupt
Unknown H/W problem
H/W ring underrun
H/W RAM parity error
H/W RAM data error
Unknown H/W problem
Unknown H/W problem
Unknown H/W problem
H/W parity error
H/W illegal Op-code
H/W DMA write abort
H/W DMA read abort
H/W DIO parity error
Event 6 SESSION TERMINATION COMPLETED
Description: Message discarded. Informational/Hardware.
Action: If problem persists, submit a UCF with a dump of the ILM.
TRNG (062): Can’t insert Station into Ring - H/W lobe cable
Description: Line is not operational. Hardware error.
Action: Correct lobe error.
TRNG (063): Can’t insert Station into Ring - Auto removal error
Description: Line is not operational. Informational only.
Action: None.
TRNG (064): Can’t insert Station into Ring - Remove MAC frame
received
Description: Line is not operational. Informational only.
Action: None.
7436 0728–303 6–13