DCP Series Telcon Message Manual - Public Support Login - Unisys

Event 12 TCP–IP GATEWAY EVENT
IP: CALL CLEARING, CAUSE = #, DIAG = #
Description: Indicates receipt of a clear indication from PSCS, clearing an active
connection. R8 contains the diagnostic code, giving the reason for the clear
indication. The TCP–IP Stack program product generates this CENLOG.
IP: CALL REJECTED, CAUSE - #, DIAG = #
Description: Indicates receipt of a clear indication from PSCS, rejecting a call
request. R8 contains the diagnostic code, giving the reason for the clear. The TCP–IP
Stack program product generates this CENLOG.
IP: CANNOT DISPLAY ALL TABLES
Description: IP cannot fit all tables into the NMS response message. The TCP–IP
Stack program product generates this CENLOG.
IP: CANNOT DISPLAY IP STATUS RECORD
Description: IP cannot fit the status into the NMS response message. The TCP–IP
Stack program product generates this CENLOG.
IP: CANNOT FIND NA FOR ADR = !
Description: There is no IPADDR configuration providing an NA for this IP address
(R8, R9). The TCP–IP Stack program product generates this CENLOG.
IP: CANNOT READ LINE, STE = #
Description: IP cannot access the configuration for a LINE statement. The
configuration database may be corrupted. The TCP–IP Stack program product
generates this CENLOG.
IP: CANNOT ROUTE ICMP ECHO REQUEST
Description: IP cannot find a route for an ICMP Echo Request. The request will be
discarded. The TCP–IP Stack program product generates this CENLOG.
IP: CFACCS ERROR: CODE = #, SPECIFIC ERROR = #
Description: Indicates a problem when accessing the Telcon configuration. R8 gives
the error type, and R9 gives a more specific diagnostic. For more information on
these codes, refer to the Telcon Programming Reference Manual (7436 0710). The
TCP–IP Stack program product generates this CENLOG.
3–34 7436 0728–303