DCP Series Telcon Message Manual - Public Support Login - Unisys

Event 3 EVENT/ERROR DETECTED AT L3 (NETWORK)
IP 31003: OSPF Event OSPF ERR_DD_NNOTSET src = xx.xxx.xxx.xxx
Description: The data base description packet received has a mismatch in option bit
N. The received packet has N bit clear indicating the area is not a NSSA (“not-sostubby”)
area. This area is locally defined as NSSA area. src=xxx.xxx.xxx.xxx is
the source address of input in the dotted decimal format.
IP 31003: OSPF Event OSPF ERR_HELLO_MASK src = xx.xxx.xxx.xxx
Description: The OSPF hello packet received contains a network mask that does
not agree with the locally defined network mask. src=xxx.xxx.xxx.xxx is the
source address of input in the dotted decimal format.
IP 31003: OSPF Event OSPF ERR_HELLO_TIMER
src =xxx.xxx.xxx.xxx
Description: The OSPF packet received contains a hello interval that does not agree
with the locally defined hello interval value. src=xxx.xxx.xxx.xxx is the source
address of input in the dotted decimal format.
IP 31003: OSPF Event OSPF ERR_HELLO_DEAD src = xxx.xxx.xxx.xxx
Description: The OSPF hello packet received contains a router dead interval that
does not agree with the locally defined router dead interval value.
src=xxx.xxx.xxx.xxx is the source address of input in the dotted decimal format.
IP 31003: OSPF Event OSPF ERR_HELLO_ESET src = xxx.xxx.xxx.xxx
Description: The OSPF hello packet received has a mismatch in option bit E. The
received packet has E bit set indicating the area is AS-external-LSA capable. The area
is locally defined as not AS-external-LSA capable. src=xxx.xxx.xxx.xxx is the
source address of input in the dotted decimal format.
IP 31003: OSPF Event OSPF ERR_HELLO_ENOTSET
src = xx.xxx.xxx.xxx
Description: The OSPF hello packet received has a mismatch in option bit E. The
received packet has E bit clear indicating the area is not AS-external-LSA capable.
The area is locally defined as AS-external-LSA capable. src=xxx.xxx.xxx.xxx is the
source address of input in the dotted decimal format.
IP 31003: OSPF Event OSPF ERR_HELLO_NSET src = xxx.xxx.xxx.xxx
Description: The OSPF hello packet received has a mismatch in option bit N. The
received packet has N bit set indicating the area is NSSA capable. The area is locally
defined as not a NSSA area. src=xxx.xxx.xxx.xxx is the source address of input in
the dotted decimal format.
7436 0728–303 13–29