DCP Series Telcon Message Manual - Public Support Login - Unisys

Event 3 EVENT/ERROR DETECTED AT L3 (NETWORK)
IP 05022: MIP (ilm=%%)UNEXPECTED CD DATA type=&1
src=%%%%%%%%
Description: The IP manager executing in ILM %% has received an unexpected
internal message of type &1. %%%%%%%% is a hexadecimal internal ICS user
identifier.
Action: The supplementary data contained in the CENLOG provides additional
information and should be submitted with a problem report.
IP 05026: MIP (ilm=%%)*** ERROR @@@ ***
Description: The IP manager executing in ILM %% has detected an internal error.
@@@ is a descriptive text string.
Action: The supplementary data contained in the CENLOG provides additional
information and should be submitted with a trouble report.
IP 05028: MIP (ilm=%%)LOW MEMORY! Router not initialized, rtr=&
Description: IP router & has not initialized because of insufficient memory.
Action: Submit a trouble report with a dump of the ILM %%.
IP 05029: MIP (ilm=%%)LOW MEMORY! INTF not initialized
(rtr=&/port=%1/if=&1)
Description: Interface &1 on port %1 on IP router & has not initialized because of
insufficient memory. %1 is the hexadecimal port number specified on a [PORTxy]
section header and &1 is the interface parameter value configured on an IP interface
section header.
Action: Submit a trouble report with a dump of ILM %%.
IP 05032: MIP (ilm=%%)cfg MTU exceeds allowed (&1>&2) line if_id
Description: The MTU (mtu_size parameter) value specified for interface if_id
exceeds the allowed value for the type of interface the port provides. &1 and &2 are
the configured and allowed values, respectively. The allowed value is used. &1 and
&2 are decimal numbers.
Action: To eliminate the CENLOG, correct the configuration and restart the IP
interface or router.
13–18 7436 0728–303