DCP Series Telcon Message Manual - Public Support Login - Unisys

*** LAST INPUT MESSAGE DISCARDED ***
NMS and DSA Messages
Description: This message informs the terminal operator that the system is unable to
accept input because of resource conflicts; such as, buffer depletion. The input
message is discarded, but may be reinitiated immediately.
Action: Reenter the last input.
LINE DOWN
Description: The line is disabled and cannot be used.
*** LINE xxxxxx INPUT STREAMING ***
Description: This message informs the terminal operator that a hardware problem
has been detected. A rapid flood of input over a UNISCOPE or teletypewriter (TTY)
line alerts the handler of a problem. The TERMINAL STREAMING message appears
when the terminal is known to CMS 1100 (that is, it is signed on and a device table
exists for it); otherwise the more general LINE STREAMING message appears on the
CMS 1100 host console.
Action: When an input streaming condition is detected, the terminal handler attempts
to synchronize input with another CMI$. If this is unsuccessful, the offending terminal
should be brought down or powered off, and proper personnel notified.
LINE LOGGING THRESHOLD CHANGE COMPLETE
Description: This is a response to the STTH command.
LINE UP...
LINE UP, (DIS,____) CONNECTED,INPUT (STOPPED,ALLOWED),
OUTPUT (STOPPED,ALLOWED),
TYPE:(UNI,TTY,etc.), (n,NO)POLL GROUP(S), n TERMINAL(S) ACTIVE
ERROR LOGGING THRESHOLD = (THRESHOLD VALUE)
MODE = (ACTIVE,BACKUP)
(This output appears only if line is resilient.)
LINE (OPERATIVE, INOPERATIVE)
Description: The line is enabled.
7436 0728–303 17–23