30.01.2013 Views

DCP Series Telcon Message Manual - Public Support Login - Unisys

DCP Series Telcon Message Manual - Public Support Login - Unisys

DCP Series Telcon Message Manual - Public Support Login - Unisys

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

SNA: 1203 – Input <strong>Message</strong> Lost<br />

Event 16 CENLOG <strong>Message</strong>s<br />

Description: This message occurs as a result of errors in the network packetswitching<br />

interface (NPSI) that SNA/net uses to communicate with terminals and<br />

other subareas across X.25 networks. The probable cause is a software problem.<br />

SNA: 1204 – Output <strong>Message</strong> Lost<br />

Description: This message occurs as a result of errors in the network packetswitching<br />

interface (NPSI) that SNA/net uses to communicate with terminals and<br />

other subareas across X.25 networks. The probable cause is a software problem.<br />

SNA: 1223 – Data Received In Wrong State<br />

Description: This message occurs as a result of errors in the network packetswitching<br />

interface (NPSI) that SNA/net uses to communicate with terminals and<br />

other subareas across X.25 networks. The probable cause is a software problem.<br />

SNA: 1225 – No Resources Available<br />

Description: The following message occurs as a result of errors in the network<br />

packet-switching interface (NPSI) that SNA/net uses to communicate with terminals<br />

and other subareas across X.25 networks. The probable cause is a software problem.<br />

SNA: 1226 – Local Procedure Error<br />

Description: This message occurs as a result of errors in NPSI that SNA/net uses to<br />

communicate with terminals and other subareas across X.25 networks.<br />

SNA: 1602 – Unsupported DTPX control msg rcv, type = x%%%%<br />

Description: This message occurs as a result of errors in DTPLNK, the part of<br />

SNA/net that enables SNA/net to communicate with other SNA/nets as if they are<br />

physically adjacent. The type is a DTPX control message type and % represents a<br />

hexadecimal number. For more information refer to the <strong>Telcon</strong> Programming<br />

Reference <strong>Manual</strong> (7430 0710). The probable cause is a software problem.<br />

SNA: 1607 – Link state = &&, and rcv connect confirm<br />

Description: This message occurs as a result of errors in DTPLNK, the part of<br />

SNA/net that enables SNA/net to communicate with other SNA/nets as if they are<br />

physically adjacent. The & represents a decimal number. The probable cause is a<br />

software problem.<br />

7436 0728–303 5–97

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!