DCP Series Telcon Message Manual - Public Support Login - Unisys

Event 2 COMMUNICATIONS LINE PROTOCOL ERROR DETECTED
BSC LPH
Description: Indicates an intermediate call for BSC line errors.
R8: Contains the flag word for the LPH. The meaning of each bit can be found in
the AAHARDEF assembly.
R11: Contains the LCB address
R12: Contains the TCB address
R14: Contains the IOP ID
R15: Contains a code indicating the type of line error
0 An incorrect response to a line bid
1 The ACK response block count is incorrect
2 A NAK was received to an output text
3 A bad ACK block count was sent to the terminal or a text was hit on the
line
4 Bad input was received from the terminal
5 No response from remote terminal or DLC character not identified
Telcon generates this CENLOG.
BVOUTPUT
Description: An attempt was made to insert data into an output buffer, but the space
was exhausted. Probable software error.
R8: Previous contents of register 0
R9: Previous contents of register 1
R10: Previous contents of register 2
R11: Previous contents of register 3
R12: Previous contents of register 6
R13: Error code denoting the relative position within the program in which the
error occurred
Telcon generates this CENLOG.
15–6 7436 0728–303