30.01.2013 Views

DCP Series Telcon Message Manual - Public Support Login - Unisys

DCP Series Telcon Message Manual - Public Support Login - Unisys

DCP Series Telcon Message Manual - Public Support Login - Unisys

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Event 11 ILM EVENT<br />

ENET (032): LCC H/W failed transceiver loopback (FATAL!)<br />

Description: Transceiver failure or problem with transceiver cable connection. ILM<br />

is not usable. The Ethernet link provider interface application (LPIA) for the ILM<br />

software generates this CENLOG.<br />

Action: ILM TDR command may indicate location and cause of problem.<br />

ENET (033): LCC H/W failed 'set SCP address' (FATAL!)<br />

Description: INTEL 825x6 internal failure. Initialization of LCC hardware structures<br />

failed. ILM is not usable. The Ethernet link provider interface application (LPIA) for<br />

the ILM software generates this CENLOG.<br />

Action: An ILM DUMP might indicate the cause of the failure.<br />

ENET (034): LCC H/W failed external loopback (FATAL!)<br />

Description: INTEL 825x6 internal failure. The probable cause is a short or open on<br />

the LAN cable. ILM is not usable. The Ethernet link provider interface application<br />

(LPIA) for the ILM software generates this CENLOG.<br />

Action: The ILM TDR command might indicate location and cause of the problem.<br />

ENET (036): Can't queue SAI signal to HLE (FATAL!)<br />

Description: ILM software error. ILM is not usable. The Ethernet link provider<br />

interface application (LPIA) for the ILM software generates this CENLOG.<br />

ENET (037): ISR - can't queue link input (FATAL!)<br />

Description: ILM software error. ILM is not usable. The Ethernet link provider<br />

interface application (LPIA) for the ILM software generates this CENLOG.<br />

ENET (039): Can't allocate LCC H/W SCB area (FATAL!)<br />

Description: ILM software error. ILM is not usable. The Ethernet link provider<br />

interface application (LPIA) for the ILM software generates this CENLOG.<br />

ENET (040): LCC H/W register dump taken (FATAL!)<br />

Description: INTEL 825x6 internal failure. ILM is not usable. The Ethernet link<br />

provider interface application (LPIA) for the ILM software generates this CENLOG.<br />

Action: An ILM DUMP may indicate the cause of the failure.<br />

6–56 7436 0728–303

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!