DCP Series Telcon Message Manual - Public Support Login - Unisys

Event 5 EVENT/ERROR DETECTED AT L5 (SESSION)
R12: If reject or abort is sent out, R12: reason code, otherwise zero.
R13: SSU ID1 if R8 = 9
R14: SSU ID2 if R8 = 9
R15: SSU Class if R8 = 9
Telcon generates this CENLOG.
EUINIT
Description: Occurs when the end user ATTACH confirm analysis routine is called
and the ATTACH confirm appears bad. Telcon generates this CENLOG.
INVALID IPM FREE CONTINGENCY FOR IPMID=nnnn REASON=nnnn
Description: DTPX encountered an error (indicted by the REASON value) while
processing the IPM FREE. Telcon generates this CENLOG.
IPM CONNECT CONTINGENCY FOR IPMID=nnnn REPLY
NAME=aaaaaaaa
Description: DTPX has received an IPM connect. The connection was initiated by
the user identified by the REPLY NAME value. Telcon generates this CENLOG.
IPM CONNECT ERROR FOR IPMID=nnnn
Description: DTPX detected an error when attempting to obtain an IPM status using
the IPM ID from an IPM CONNECT. Telcon generates this CENLOG.
IPM CONTINGENCY CODE ERROR–CODE=nnnn
Description: DTPX has received an unrecognized IPM contingency code (indicated
by the code value). Telcon generates this CENLOG.
IPM DISCONNECT CONTINGENCY FOR IPMID=nnnn
REPLY NAME=aaaaaaaa FREE STATUS=nnnn
Description: DTPX received an IPM DISCONNECT. The DISCONNECT was for the
user identified by the REPLY NAME value. Telcon generates this CENLOG.
IPM DISCONNECT PERFORMED FOR IPMID=nnnn DISCONNECT
STATUS=nnnn
Description: DTPX disconnected the IPM attachment indicated by the IPMID value.
Telcon generates this CENLOG.
13–82 7436 0728–303