DCP Series Telcon Message Manual - Public Support Login - Unisys

Event 3 EVENT/ERROR DETECTED AT L3 (NETWORK)
OSISIS: IS IGNORING RD PDU
Description: Received a Redirect PDU when configured as an IS. The OSISIS
component of the OSITS program product generates this CENLOG.
Reason: Programming error.
OSISIS: LSP DATABASE OVERLOAD
Description: Could not store an LSP. The OSISIS component of the OSITS program
product generates this CENLOG.
Reason: Insufficient resources.
OSISIS: MANUAL ADDRESS DROPPED FROM AREA
Description: One of the configured L1AREAS on the NSAP configuration statement
has been dropped. The OSISIS component of the OSITS program product generates
this CENLOG.
Reason: The number of manual addresses on the LAN exceeded MAXAREAS and only
the numerically lowest addresses are kept.
OSISIS: MAXIMUM AREA ADDRESSES MISMATCH
Description: Received an ISIS PDU with a maximum number of areas that does not
match the MAXAREAS configured on the NSAP configuration statement. The OSISIS
component of the OSITS program product generates this CENLOG.
Reason: There is an IS on the network that is not configured correctly.
OSISIS: MMERROR: {function} {pool name}
Description: An error occurred during a call to the Memory Manager. The OSISIS
component of the OSITS program product generates this CENLOG.
Reason:
R8: Memory management error code.
R9: System error code.
R10: Control block address.
R11: Control block ID.
13–50 7436 0728–303