DCP Series Telcon Message Manual - Public Support Login - Unisys

Event 11 ILM EVENT
SNMP 133 SNMPv1 not enabled
Description: The SNMP Agent has received an SNMP version 1 PDU that it is not
enabled to process. The PDU is discarded.
Action: This error probably would result from an internal corruption of SNMP tables
or code. If this CENLOG occurs repeatedly, dump the ILM as close as possible to an
occurrence.
SNMP 134 var_info chain ptr error
Description: The internal linking of MIB variables for building a response message
has been corrupted. The response message is discarded.
Action: This error probably would result from an internal corruption of SNMP tables
or code. If this CENLOG occurs repeatedly, dump the ILM as close as possible to an
occurrence.
SNMP 136 Bad file status xxxx
Description: An error status has been received when processing the MIB subtree
files. These DCP files are read during SNMP Agent initialization. An error processing
any of these files results in part of the MIB not being built (although the part which is
built is not in error).
Variables: xxxx The hex error status value. Common values are:
0016 File not cataloged.
0075 File in exclusive use.
0090 Element not found.
0100 File I/O error.
Action: Verify that the file ENS*ENSMIB exists on the DCP. (This filename can be
changed using the MIBfile configuration statement.) The SNMP Agent expects to read
the following elements from the file (unless skipped by the MIBskip configuration
statement): CHRSTRM, DCPOS, FR, HOSTRES, IPX, PSCS, SNANET, UTS,
X25DL, X25PL.
SNMP 137 CIM_FILE interface problem xxxx
Description: An internal error has been detected between the SNMP Agent and
CIM-FILE. The reading of the MIB subtree files is aborted if this error occurs.
Variable: xxxx Internal diagnostic value.
Action: Dump the ILM as close as possible to an occurrence.
6–96 7436 0728–303