DCP Series Telcon Message Manual - Public Support Login - Unisys

NMS and DSA Messages
*** ERROR: CANNOT MOVE TO AN INCOMPATIBLE LINE TYPE ***
Description: The station facility move was requested. The line type of the TO parent
(line or group) is a non-UDLC line. The facility move was aborted.
Action: Verify the configuration for the TO port number, and reenter the MOVE
command.
*** ERROR: CATALOG ABORT, FATAL ERROR n ***
Description: The CAT command was attempted, but aborted due to a fatal error.
Action: Refer to the DCP/OS Operations Reference Manual (7831 5702) for an
explanation.
*** ERROR: CLUSTER IS DOWN ***
Description: An UP terminal command is invalid if the terminal cluster is down.
Action: Bring up the related cluster first, and reenter the command.
*** ERROR: CLUSTER IS STOPPED ***
Description: A STRT terminal command (input or output) is invalid if the
corresponding state of the terminal cluster is stopped.
Action: Use the STRT command to start the related cluster first, and reenter the
command.
*** ERROR: COMMAND NOT IMPLEMENTED ***
Description: The command is defined, but not implemented.
*** ERROR: COMMAND NOT SUPPORTED FOR THIS TERMINAL TYPE ***
Description: This command is not applicable to this type of terminal.
*** ERROR: CONFIGURATION ACCESS LOGICAL ERROR ***
Description: The NMS software was unable to process a session look-up.
Action: Check the TYPE parameter in NMS EU statement.
17–8 7436 0728–303