DCP Series Telcon Message Manual - Public Support Login - Unisys

LAN: 39 - HLE MESSAGE COULD NOT BE SENT
Event 16 CENLOG Messages
Description: ILMSVS tried to queue a HLEMAN indication or confirmation message
to the HLE. It could not because the queue number could not be found, or the queue
could not be added to the ILMSVS queue list entry. Software error. The 802.3 LM
Handler component of the ENS program product generates this CENLOG.
LAN: 40 - DATA UDM
Description: An output message was placed on the UDM queue, or thrown away if
there is no UDM queue, because the line module could not send the message over the
LAN. The 802.3 LM Handler component of the ENS program product generates this
CENLOG.
LAN: 41 - DUT TABLE IS FULL
Description: The dynamic user table (DUT) has reached maximum size. If the line is
down, only the HLE in the DUT will be notified when the line comes up. The 802.3 LM
Handler component of the ENS program product generates this CENLOG.
Action: You can fix this problem by using less dynamic attaches. Configure an attach
(SAP) for each time this CENLOG occurs.
LAN: 42 - ERROR CREATING THE DUT
Description: An error occurred while trying to create a dynamic user table (DUT).
Dynamic attaches do not work. The 802.3 LM Handler component of the ENS
program product generates this CENLOG.
7436 0728–303 3–81