DCP Series Telcon Message Manual - Public Support Login - Unisys

Event 5 POLL GROUP STATUS
POLL GROUP STATUS
Event 5 POLL GROUP STATUS
Description: UNISCOPE poll group has entered slow poll. R15 contains the value of
the RID for the poll group. Telcon generates this CENLOG.
Action: Several actions are possible to correct the error. Check modem, cluster
controller, or terminal, and repair as necessary. If the logging of the error should
cause intolerable overhead to the system, an NMS DOWN PGRP command may be
issued for the poll group. When the problem has been solved and the system brought
back online, an NMS UP PGRP command will have to be issued.
Supplementary Messages for Class 15, Event 05
POLL GROUP IN SLOW POLL (UNISCOPE)
Description: UNISCOPE poll group has entered slow poll. R15 contains the value of
the RID for the poll group. Telcon generates this CENLOG.
Action: See operator action under primary message.
POLL GROUP IN FAST POLL (UNISCOPE)
Description: UNISCOPE poll group has returned to fast poll. R15 contains the value
of the RID of the poll group. Telcon generates this CENLOG.
Action: See operator action under primary message.
UNILPH
Description: The poll group changes the state from FAST POLL to SLOW POLL or
from SLOW POLL to FAST POLL.
R11: LCB Address
R15: RID for the poll group
Telcon generates this CENLOG.
7436 0728–303 15–21