30.01.2013 Views

DCP Series Telcon Message Manual - Public Support Login - Unisys

DCP Series Telcon Message Manual - Public Support Login - Unisys

DCP Series Telcon Message Manual - Public Support Login - Unisys

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Event 3 EVENT/ERROR DETECTED AT L3 (NETWORK)<br />

IP 31003: OSPF Event OSPF ERR_HDR_SHORT (rtr = xxxxx)<br />

Description: The OSPF header length field value of the OSPF packet received is less<br />

than the minimum OSPF header size. rtr=xxxxx identifies the local IP router.<br />

IP 31003: OSPF Event OSPF LEN_LONG (rtr = xxxxx)<br />

Description: The OSPF header length field value of the OSPF packet received is<br />

greater than the datagram length field value contained in the IP header. rtr=xxxxx<br />

identifies the local IP router.<br />

IP 31003: OSPF Event OSPF ERR_VERSION (rtr = xxxxx)<br />

Description: The OSPF packet with a version number not equal to 2. rtr=xxxxx<br />

identifies the local IP router.<br />

IP 31003: OSPF Event SPF scheduled (rtr = xxxxx)<br />

Description: The OSPF SPF algorithm scheduled for the specified local router.<br />

rtr=xxxxx identifies the local IP router.<br />

LAX IN USE, SHOULDN’T BE<br />

Description: The PDNDXA module was unable to save a data message in the link<br />

area. The data message has been discarded. A software error has either corrupted<br />

the link area or the link area indices in the DTE VC table.<br />

Attributes affected: Fatal error event. The X.25 PSCS program product generates<br />

this CENLOG. Procedure: TPCDATA.<br />

LAX NOT IN USE, SHOULD BE<br />

Description: The PDNDXA module cannot successfully obtain a data message from<br />

link area. A software error has either corrupted the index used to access the linked<br />

data message in the DTE virtual circuit table, or the link area itself has become<br />

corrupted.<br />

Attributes affected: Fatal error event. The X.25 PSCS program product generates<br />

this CENLOG. Procedure: TPCDATA.<br />

7436 0728–303 13–31

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!