Configuration Handbook - Kamami.pl

Active Serial Configuration (Serial Configuration Devices)Figure 7–14. Multi-Device AS Configuration When devices Receive the Same DataStratix II FPGA SlavenSTATUSCONF_DONE nCEOnCONFIGnCEN.C.(1) V CC (1) V CC (1)10 kΩ10 kΩ10 kΩDATA0DCLK(2) MSEL3(2) MSEL2(2) MSEL1V CC(2) MSEL0Serial ConfigurationDeviceStratix II FPGA MasternSTATUSCONF_DONEStratix II FPGA SlavenSTATUSCONF_DONEnCEOGNDN.C.nCEV CCnCONFIG nCONFIGnCEOV CCnCEDATADCLKnCSASDIGNDDATA0DCLKnCSOASDO(2) MSEL3(2) MSEL2(2) MSEL1(2) MSEL0DATA0DCLK(2) MSEL3(2) MSEL2(2) MSEL1(2) MSEL0V CCGNDGNDStratix II FPGA SlavenSTATUSCONF_DONE nCEOnCONFIGnCEN.C.DATA0DCLK(2) MSEL3(2) MSEL2(2) MSEL1(2) MSEL0V CCGNDNotes to Figure 7–14:(1) Connect the pull-up resistors to a 3.3-V supply.(2) If using an EPCS4 device, MSEL[3..0] should be set to 1101. Refer to Table 7–11 for more details.7–42 Altera CorporationStratix II Device Handbook, Volume 2 May 2007