Configuration Handbook - Kamami.pl

Configuring Stratix & Stratix GX DevicesJam InstructionsEach Jam statement begins with one of the instruction names listed inTable 11–13. The instruction names, including the names of the optionalinstructions, are reserved keywords that you cannot use as variable orlabel identifiers in a Jam program.Table 11–13. Instruction NamesBOOLEAN INTEGER PREIRCALL IRSCAN PRINTCRC IRSTOP PUSHDRSCAN LET RETURNDRSTOP NEXT STATEEXIT NOTE WAITEXPORT POP VECTOR (1)FOR POSTDR VMAP (1)GOTO POSTIR –IF PREDR –Note to Table 11–13:(1) This instruction name is an optional language extension.Table 11–14 shows the state names that are reserved keywords in the Jamlanguage. These keywords correspond to the state names specified in theIEEE Std. 1149.1 JTAG specification.Table 11–14. Reserved Keywords (Part 1 of 2)IEEE Std. 1149.1 JTAG State NamesTest-Logic-ResetRun-Test-IdleSelect-DR-ScanCapture-DRShift-DRExit1-DRPause-DRExit2-DRUpdate-DRSelect-IR-ScanJam Reserved State NamesRESETIDLEDRSELECTDRCAPTUREDRSHIFTDREXIT1DRPAUSEDREXIT2DRUPDATEIRSELECTAltera Corporation 11–49July 2005 Stratix Device Handbook, Volume 2