Configuration Handbook - Kamami.pl

Configuring Cyclone FPGAsDocumentRevision HistoryTable 13–13 shows the revision history for this document.Table 13–13. Document Revision HistoryDate &DocumentVersionChanges MadeSummary of ChangesJanuary 2007 ● Added document revision history.v1.7● Removed a note from Table 13–2.● Updated Figure 13–1.● Updated Table 13–3.● Updated feetpara note in “Active Serial Configuration (SerialConfiguration Devices)” section.● Updated feetpara note on page 13–18.● Updated Note (2) in Figure 13–11.● Updated Note (4) in Figure 13–12.● Updated Note (2) in Figure 13–19.July 2006, v1.6 Updated Figure 13–19.August 2005 ● Updated tables.v1.5● Minor text updates.March 2005v1.4February 2005v1.3August 2004v1.2July 2003 v1.1May 2003 v1.0● Updated Figure 13–1.● Updated Figure 13–10.Updated Figure 13–13.● Deleted sections: Programming Configuration Devices,Connecting the JTAG Chain, Passive Serial and JTAG,Device Options, Device Configuration Files, ConfigurationReliability, and Board Layout Tips.● Deleted figures: Embedded System Block Diagram,Combining PS & JTAG Configuration, Configuration OptionsDialog Box.● Deleted table: Cyclone Configuration Option Bits.● Added: USB Blaster to cable list; new Figure 13–13; text onpages 13-14, 13-29, and 13-30, and information toTable 13–6.● Changes to Figures 13–14 to 13–16, 13–19, 13–20, 13–25;numbers changed in EP1C4 row of Table 13–3.● Added extensive descriptions of configuration methods underthe “Configuring Multiple Devices with the Same Data”section.Updated .rbf sizes. Minor updates throughout the document.Added document to Cyclone Device Handbook.Altera Corporation 13–51January 2007 Cyclone Device Handbook, Volume 1