12.07.2015 Views

Configuration Handbook - Kamami.pl

Configuration Handbook - Kamami.pl

Configuration Handbook - Kamami.pl

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

JTAG <strong>Configuration</strong>1 The Quartus II software sets the Cyclone II device nCEO pin asan output pin driving to ground by default. If the nCEO pininputs to the next device’s nCE pin, make sure that the nCEO pinis not used as a user I/O pin after configuration.Other Altera devices that have JTAG support can be <strong>pl</strong>aced in the sameJTAG chain for device programming and configuration.fFor more information on configuring multi<strong>pl</strong>e Altera devices in the sameconfiguration chain, see the Configuring Mixed Altera FPGA Chainschapter in the <strong>Configuration</strong> <strong>Handbook</strong>.Jam STAPLJam STAPL, JEDEC standard JESD-71, is a standard file format for insystemprogrammability (ISP). Jam STAPL supports programming orconfiguration of programmable devices and testing of electronic systemsusing the IEEE 1149.1 JTAG interface. Jam STAPL is a freely licensed openstandard. The Jam <strong>pl</strong>ayer provides an interface for manipulating the IEEEStd. 1149.1 JTAG TAP state machine.fFor more information on JTAG and Jam STAPL in embeddedenvironments, see AN 122: Using Jam STAPL for ISP & ICR via anEmbedded Processor. To download the Jam <strong>pl</strong>ayer, go to the Altera website (www.altera.com).Configuring Cyclone II FPGAs with JRunnerJRunner is a software driver that allows you to configure Cyclone IIdevices through the ByteBlaster II or ByteBlasterMV cables in JTAGmode. The programming input file supported is in .rbf format. JRunneralso requires a Chain Description File (.cdf) generated by the Quartus IIsoftware. JRunner is targeted for embedded JTAG configuration. Thesource code has been developed for the Windows NT operating system(OS). You can customize the code to make it run on your embedded<strong>pl</strong>atform.1 The RBF file used by the JRunner software driver can not be acompressed RBF file because JRunner uses JTAG-basedconfiguration. During JTAG-based configuration, the real-timedecompression feature is not available.fFor more information on the JRunner software driver, see JRunnerSoftware Driver: An Embedded Solution for PLD JTAG <strong>Configuration</strong> and thesource files on the Altera web site.13–60 Altera CorporationCyclone II Device <strong>Handbook</strong>, Volume 1 February 2007

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!