12.07.2015 Views

Configuration Handbook - Kamami.pl

Configuration Handbook - Kamami.pl

Configuration Handbook - Kamami.pl

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

5. <strong>Configuration</strong> Devices forSRAM-Based LUT DevicesData SheetCF52005-2.2Features ■ <strong>Configuration</strong> device family for configuring Stratix ® series, Cyclone ®series, APEX TM II, APEX 20K (including APEX 20K, APEX 20KC, andAPEX 20KE), Mercury TM , ACEX ® 1K, and FLEX ® (FLEX 10KE, and■■■■■■■FLEX 10KA) devicesEasy-to-use 4-pin interface to Altera ® FPGAsLow current during configuration and near-zero standby current5.0-V and 3.3-V operationSoftware design support with the Altera Quartus ® II andMAX+PLUS ® II development systems for Windows-based PCs aswell as Sun SPARCstation, and HP 9000 Series 700/800Programming support with the Altera Programming Unit (APU) andprogramming hardware from Data I/O, BP Microsystems, and otherthird-party programmersAvailable in compact <strong>pl</strong>astic packages● 8-pin <strong>pl</strong>astic dual in-line package (PDIP)● 20-pin <strong>pl</strong>astic J-lead chip carrier (PLCC) package● 32-pin <strong>pl</strong>astic thin quad flat pack (TQFP) packageEPC2 device has reprogrammable Flash configuration memory● 5.0-V and 3.3-V in-system programmability (ISP) through thebuilt-in IEEE Std. 1149.1 Joint Test Action Group (JTAG)interface● Built-in JTAG boundary-scan test (BST) circuitry com<strong>pl</strong>iant withIEEE Std. 1149.1● ISP circuitry is compatible with IEEE Std. 1532●●●●Supports programming through Serial Vector Format Files(.svf), Jam Standard Test and Programming Language (STAPL)Files (.jam), Jam STAPL Byte-Code Files (.jbc), and theQuartus II and MAX+PLUS II software via the USB Blaster,MasterBlaster TM , ByteBlaster TM II, EthernetBlaster, orByteBlasterMV TM download cablenINIT_CONF pin allows INIT_CONF JTAG instruction toinitiate FPGA configurationCan be programmed with Programmer Object Files (.pof) forEPC1 and EPC1441 devicesAvailable in 20-pin PLCC and 32-pin TQFP packagesfFor detailed information on enhanced configuration devices, refer toEnhanced <strong>Configuration</strong> Devices (EPC4, EPC8 & EPC16) Data Sheet. Fordetailed information on serial configuration devices, refer to Serial<strong>Configuration</strong> Devices (EPCS1, EPCS4, EPCS16, & EPCS64) Data Sheet.Altera Corporation 5–1April 2007

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!