Configuration Handbook - Kamami.pl

JTAG ConfigurationThe Jam Player provides an interface for manipulating the IEEE Std.1149.1 JTAG TAP state machine.fFor more information on JTAG and Jam STAPL in embeddedenvironments, refer to AN 122: Using Jam STAPL for ISP & ICR via anEmbedded Processor. To download the jam player, visit the Altera web siteat:www.altera.com/support/software/download/programming/jam/jam-index.jspConfiguring APEX 20KE & APEX 20KC FPGAs with JRunnerJRunner is a software driver that allows you to configure Altera FPGAs,including APEX 20KE and APEX 20KC FPGAs, through the ByteBlasterII or ByteBlasterMV cables in JTAG mode. The programming input filesupported is in RBF format. JRunner also requires a Chain DescriptionFile (.cdf) generated by the Quartus II software. JRunner is targeted forembedded JTAG configuration. The source code has been developed forthe Windows NT operating system (OS). You can customize the code tomake it run on other platforms.fFor more information on the JRunner software driver, refer to theJRunner Software Driver: An Embedded Solution to the JTAG ConfigurationWhite Paper and the source files.7–58 Altera CorporationConfiguration Handbook, Volume 1 August 2005