Configuration Handbook - Kamami.pl

Configuring APEX 20KE & APEX 20KC DevicesPassive SerialConfigurationYou can perform APEX 20KE and APEX 20KC PS configuration using anAltera configuration device, an intelligent host (e.g., a microprocessor orAltera ® MAX ® device), or a download cable.PS Configuration Using a Configuration DeviceYou can use an Altera configuration device, such as an enhancedconfiguration device, EPC2, or EPC1 device, to configure APEX 20KE andAPEX 20KC devices using a serial configuration bitstream. Configurationdata is stored in the configuration device. Figure 7–1 shows theconfiguration interface connections between the APEX 20KE or APEX20KC device and a configuration device for single device configuration.1 The figures in this chapter only show the configuration-relatedpins and the configuration pin connections between theconfiguration device and the FPGA.fFor more information on the enhanced configuration device and flashinterface pins (e.g., PGM[2..0], EXCLK, PORSEL, A[20..0], andDQ[15..0]), refer to the Enhanced Configuration Devices (EPC4, EPC8 &EPC16) Data Sheet in the Configuration Handbook.Altera Corporation 7–3August 2005 Configuration Handbook, Volume 1