Configuration Handbook - Kamami.pl

Functional DescriptionTable 4–7. Serial Configuration Device for Cyclone III Devices (Part 2 of 2)Cyclone IIIDeviceRaw Binary FileSize (Bits) (1) (3)EP3C120 30,500,000 vNotes to Table 4–7:(1) These are uncompressed file sizes.(2) This is with the Cyclone III compression feature enabled.(3) These values are preliminary.Serial Configuration DeviceEPCS1 EPCS4 EPCS16 EPCS64With the new data-decompression feature in the Stratix II, Stratix II GX,Stratix III FPGAs, and Cyclone FPGA families, designers can use smallerserial configuration devices to configure larger FPGAs.1 Serial configuration devices cannot be cascaded.fffffSee Configuring Stratix III Devices in the Stratix III Device Handbook formore information regarding the Stratix III FPGA decompression feature.See Configuring Stratix II and Stratix II GX Devices in the ConfigurationHandbook for more information regarding the Stratix II FPGAdecompression feature.See Configuring Cyclone III Devices in the Cyclone III Device Handbook formore information regarding the Cyclone III FPGA decompressionfeature.See Configuring Cyclone II Devices in the Configuration Handbook for moreinformation regarding the Cyclone II FPGA decompression feature.See Configuring Cyclone FPGAs in the Configuration Handbook for moreinformation regarding the Cyclone FPGA decompression feature.The serial configuration devices are designed to configure Stratix II,Stratix II GX, and Stratix III FPGAs and the Cyclone series FPGAs andcannot configure other existing Altera FPGA device families.Figure 4–1 shows the serial configuration device block diagram.4–6 Altera CorporationConfiguration Handbook, Volume 2 April 2007