Configuration Handbook - Kamami.pl

Configuring Cyclone FPGAsJam InstructionsEach Jam statement begins with one of the instruction names listed inTable 13–8. The instruction names, including the names of the optionalinstructions, are reserved keywords that you cannot use as variable orlabel identifiers in a Jam program.Table 13–8. Instruction NamesBOOLEAN INTEGER PREIRCALL IRSCAN PRINTCRC IRSTOP PUSHDRSCAN LET RETURNDRSTOP NEXT STATEEXIT NOTE WAITEXPORT POP VECTOR (1)FOR POSTDR VMAP (1)GOTO POSTIR -IF PREDR -Note to Table 13–8:(1) This instruction name is an optional language extension.Table 13–9 shows the state names that are reserved keywords in the Jamlanguage. These keywords correspond to the state names specified in theIEEE Std. 1149.1 JTAG specification.Table 13–9. Reserved Keywords (Part 1 of 2)IEEE Std. 1149.1 JTAG State NamesTest-Logic-ResetRun-Test-IdleSelect-DR-ScanCapture-DRShift-DRExit1-DRPause-DRExit2-DRUpdate-DRSelect-IR-ScanCapture-IRJam Reserved State NamesRESETIDLEDRSELECTDRCAPTUREDRSHIFTDREXIT1DRPAUSEDREXIT2DRUPDATEIRSELECTIRCAPTUREAltera Corporation 13–43January 2007 Cyclone Device Handbook, Volume 1